Electricians Know The Right Conduit For Your Electrical Repairs

Underground cable for running electrical power to a remote location can be installed at different depths, depending on the type of conduit and type of wire used. If you're considering running a power line underground through your yard, you have four options. Your choice depends on how much power you want. It also depends on your soil type—if it's sandy and easy to dig, save money by digging deep (you won't need to use metal conduit). If it's rocky or clay, then you will need to keep all digging to a minimum. Consult certified electricians in Houston first, or whichever city you might be in.
Whichever method you choose, be sure to include a service entrance ell, which has a removable cover to give you access to the inside wires, above ground level. And get a permit and talk to your inspector about local codes before starting. Quality Electricians in Houston will obtain these permits with ease, which means less work for you.
Decide how much digging you're prepared to do, which determines the type of wire you need to use. At 6 in. deep, use galvanized metal rigid electrical conduit (1/2-in.-diameter is large enough for the water feature) and run individual conductors inside. The conductors need to be waterproof, so look for a “W” on the label, as in THWN-2. This method lets you run any size circuit. The downside is the cost—1/2-in. metal conduit is over a dollar a foot. If you have soil that's tough to dig, or you only need to run the cable a short distance, go this route to minimize digging. Always best to leave difficult electrical repair to a certified Electrician in Houston.